Monday, June 04, 2007

Nanoscale imaging reveals unexpected behaviors in high-temperature superconductors

Books by the authors and related Topics.

'Covers the full range of properties of HTS....belongs on the desk of every scientist and engineer working with HTS.' --MRS Bulletin



Times Higher Education Supplement An excellent . . . [assemblage of] articles that offer a concrete and comprehensive demonstration of [Anderson's] original thesis.



Using a customized microscope, Princeton scientists have mapped the strength of current-carrying electron pairs as they form in a ceramic superconductor. From top to bottom, the images show the same 30-nanometer square region of the ceramic at successively cooler temperatures. Red areas indicate the presence of superconducting pairs. Even at 10 degrees Celsius above Tc, the temperature at which the entire sample exhibits superconductivity, the electron pairs still exist in localized regions (Image courtesy of the Yazdani Group)
(Image courtesy of the Yazdani Group)
Recent discoveries regarding the physics of ceramic superconductors may help improve scientists' understanding of resistance-free electrical power.

Tiny, isolated patches of superconductivity exist within these substances at higher temperatures than previously were known, according to a paper by Princeton scientists, who have developed new techniques to image superconducting behavior at the nanoscale.

Superconductivity, the ability to carry electrical current without resistance, could revolutionize electrical power transmission if the property ever appeared in a material at close to room temperature. Even the so-called high-temperature ceramic superconductors discovered two decades ago must be cooled to more than minus 100 degrees Celsius to function.

Using a special customized microscope, the Princeton team has discovered that traces of superconductivity remain present inside these ceramic materials even when they are warmed up above the critical temperature where they lose their resistance. Though the entire sample is too warm to exhibit superconductivity, disconnected regions within it possess Cooper pairs -- the coupled electrons that carry current through a superconductor -- which previously were only known to appear below the critical temperature at which a material superconducts.

The regions are only a few nanometers wide, but they appear in some materials at up to 50 degrees above the critical temperature. Ali Yazdani, senior author of the research paper, said that understanding why these minuscule patches of superconductivity exist at higher temperatures -- and how to create a material that exhibits the property everywhere -- may be the key to enhancing superconductivity.

"Our measurements show that Cooper pairs survive in local patches of the material at temperatures far above the critical temperature," said Yazdani, a professor of physics at Princeton. "Within these tiny regions, there are particular arrangements of atoms that favor formation of electron pairs at very high temperatures. These patches are a precursor to superconductivity and important to enhancing it."

The paper appears in the May 31 edition of Nature. Other members of the research group are Princeton graduate students Kenjiro Gomes and Aakash Pushp and postdoctoral fellow Abhay Pasupathy, as well as Shimpei Ono and Yoichi Ando of the Central Research Institute of Electric Power Industry in Tokyo.

For more than two decades, scientists have worked to explain and enhance the performance of copper-oxide based ceramics, which two decades ago were discovered to superconduct at temperatures far warmer than any other known materials -- though still requiring temperatures that are quite chilly by human standards. High-temperature superconductivity in ceramics has defied a widely accepted explanation and is considered one of the major puzzles in physics.

The key to the puzzle is to determine how electrons, which are negatively charged and normally repel one another, mysteriously change their attitude toward each other and form Cooper pairs. Below the critical temperature, the pairs form everywhere in a material, and can then act in concert as a "superfluid" to carry electric current through it without resistance.

"In lower temperature superconductors, electrons pair up and form a superfluid at the critical temperature -- end of story," Yazdani said. "In ceramics, however, our team is finding that electron pairing occurs over a wide range of temperatures, and their pairing is a function of highly localized chemistry in the sample, often in patches only a few atoms wide."
Investigation on this tiny scale was made possible by a state-of-the-art scanning tunneling microscope the Princeton team designed especially to map superconducting properties on the scale of single atoms while they changed the temperature. The team was able to apply their technique systematically to a large number of high quality copper-oxide superconducting samples.

Unlike an optical microscope that uses light to magnify, the scanning tunneling microscope uses a beam of electrons from a sharp tip to image the sample. The beam served a double purpose for the experiments: Not only does it provide images of a sample down to scales of just a few atoms wide, the beam also is capable of breaking apart electron pairs if it is energetic enough. By varying the energy of the electron beam, the team was able to determine whether pairs had formed in a given spot within the material.

"We spent about two and a half years looking at many different samples at different temperatures to decipher the story," Yazdani said. "We were motivated to search for pairing at high temperatures because of the work of others, most notably that of my colleague Phuan Ong."

The researchers hope to use their experimental results to shed light on what controls the pairing temperature on the atomic scale in ceramic superconductors, and also to determine what limits the Cooper pairs' ability to get their act together to superconduct.

"This type of precision experiment performed while varying temperature gives us a new window into the complex problem of ceramic superconductors," Yazdani said. "If we can figure out the details of what is happening at these local patches within the samples, it might be possible to construct a material that performs better overall."

Such an accomplishment might revolutionize technology for the power industry, said Mike Norman, a physicist in Argonne National Laboratory's Materials Science Division, who was not affiliated with the research.

"If we could raise the critical temperature by making the sample more homogeneous, then superconductivity's application to day-to-day technologies, such as power grids, becomes much more realistic," Norman said. "The nice thing with superconductors is that there is no power loss, so they could be a major player in 'green' and 'efficient' technologies for power transmission."

The National Science Foundation funded this work through a grant from its Division of Materials Research and its support of the Princeton Center for Complex Materials through its program for Materials Research Science and Engineering Centers.

Abstract: Visualizing Pair Formation on the Atomic Scale in the High-Tc Superconductor Bi2Sr2CaCu2O8+δ, By Kenjiro K. Gomes, Abhay N. Pasupathy, Aakash Pushp, Shimpei Ono, Yoichi Ando and Ali Yazdani

Pairing of electrons in conventional superconductors occurs at the superconducting transition temperature, Tc, creating an energy gap Δ in the electronic density of states (DOS). In the high-Tc superconductors, a partial gap in the DOS exists below a temperature T* > Tc. A key question is whether the gap in the DOS above Tc is associated with pairing, and what determines the temperature at which incoherent pairs form.

Here we report the first spatially resolved measurements of gap formation in a high-Tc superconductor, measured on Bi2Sr2CaCu2O8+δ samples with different Tc’s (hole concentration x = 0.12 to 0.22) using scanning tunneling microscopy (STM). Over a wide range of doping (0.16 ≤ x ≤ 0.22) we find that pairing gaps nucleate in nanoscale regions above Tc. These regions proliferate as the temperature is lowered, resulting in a spatial distribution of gap sizes Δ in the superconducting state. Despite the inhomogeneity, we find that every pairing gap Δ develops locally at a temperature Tp, following the relation 2Δ/kBTp = 7.9±0.5.

At very low doping (x ≤ 0.14), systematic changes in the DOS indicate the presence of another phenomenon, which is unrelated and perhaps competes with electron pairing. Our observation of nanometer-sized pairing regions provides the missing microscopic basis for understanding recent reports of fluctuating superconducting response above Tc in hole-doped high-Tc cuprate superconductors.

Contact: Chad Boutin cboutin@princeton.edu 765-404-4747 Princeton University

News from PRINCETON UNIVERSITY Office of Communications 22 Chambers St. Princeton, New Jersey 08542Telephone (609) 258-3601; Fax (609) 258-1301

Technorati tags: and or and or and or or and

No comments:

Post a Comment